6 position boost control
 

6 position switch (5 x Rotary Switch Potentiometer 2pole 6POSITION 15pin | eBay)

A resistor network. (Chief Delphi - View Profile: ZZII 527)

This will give me a 0-5V input in 6 steps.

Set this up as a linear sensor in tunerstudio

https://www.miataturbo.net/attachmen...ine=1447782724

Set up boost blending. Max boost in table 2, min boost in table 1.

Have 6 levels of boost control!! Wooo

Same switch can be used for launch control and traction control

why?

how about just not suck?

um...to show off at car meets? duh

Why the fuck else would you do it

fair nuff.

:brain:

Cool, but even cooler if you set the X axis to react based on Flex%, which is what I plan to do :)

Orrrr, you do a dual table flex blend using Blend Curve (8). And the knob based table Blend Curve (6). Then you have 6 positions of boost that also vary based on ethanol content.*

:party:

(either way you should be using Blend Curve 8 for Flex blending, because it effects all of the tables.)

*I have not tried this. And I'm not at my car to see if the MS freaks out if I set it up like this.

Attachment 232543

Interested in outcome from both of you. :likecat:

Mine will be boring. I'm on a stock 1.6. Sav's will be epic.

blending both based on ethanol content sounds epic.

work out the details so I can hop on the bandwagon :giggle:

Details are worked out :)

See flex fuel thread and this thread.

You have this completely ironed out and working perfectly?

I mean in my brain it is, thats pretty much the same right? :D

where's the -props button

Thankfully gone.

:hatecat:

I have all of the parts and none of the time :) It will happen eventually.

Ive blended boost based on E% on a Rev MS3. I was very happy with the outcome.

Dann

Yes. Blending boost tables on ethanol % is awesome.

Vlad just for you I'm going to talk yank into doing this on his car. Because he is already running flex fuel and boost control.

sure :party:

Aidan. I'm already blending boost and timing based on e%.

Sorry I thought this was just a board with 6 more 0-5v inputs. I just want more P's and T's data.

Ms3+MS3x already has 2 spare 0-5v. Tinyiox has another 9

6 position boost control
 

Lulz. I'm just watching.

MS1 peasant.

My Greeeeedy Profec B has a lot more than six positions but I'm interested in seeing what you are fiddling with.
:violin:

Fiddling, get it?

You know what I'm fiddling.