apariah

I have a 1992 1.6 miata running a MSPNP Gen 2. The car has had lots done in the past, but I decided to go back to the oem injectors to sort out a few issues before doing a e85 tune. The car hasn't run well for a while, but it did run and idle last week. Before I swapped back in the OEM injectors it was running RX7 460's. The car was also rewired for sequential injection, and it has a Variable TPS. I created a new profile in tunerstudio and download the 90-93 basemap from DIY autotune. I tried starting the car with the basemap after setting the injection to semi-sequential. The car did not start, but on my final attempt while logging as I released the ignition the car seemed like it was going to start. So I tried several times more, but with no success. I'm hoping to get the car running similar to stock for a bit before making any serious changes. The car is turbocharged, but I will be running minimal boost if I get it started. Any help getting it started will be greatly appreciated. I've attached my current msq, and a log. The car is now running stock 92 injectors and the oem coils.