AEM UEGO doesn't agree with mspnp
Edit: found my problem. Apparently in the configuration window, for the aem uego to work you need to select AEM Linear, not AEM UEGO non-linear. I was using the later, and it wasn't reading correctly. Switched it and now the ms's gauge and my aem gauge read identical.
On a side note, I remember reading about someone creating a ini file or something to allow the target tables to show target A/F instead of the equivilant target Volts for the AEM UEGO. Anyone know more about this? Couldn't dig this up using the search... -Ryan |
i tried but couldn't get it to work, i gave up
|
Sounds like you figured it out, AEM linear. While you're at it, make sure the WB is grounded to the same location as the ECU (probably the valve cover)
|
http://forums.plastikhosting.net/viewtopic.php?t=3809
Scroll down the page. |
I completely forgot to ground the wideband to the same point as the ecu. Add that to tomorrows to-do list. Thanks.
-Ryan |
I ran the wideband's ground into the engine bay but where does the ecu ground?
edit: nevermind, for anyone else wondering, it's covered in Foundsoul's DIY Megasquirt FAQ under installing a wideband. |
Originally Posted by cjernigan
(Post 257642)
http://forums.plastikhosting.net/viewtopic.php?t=3809
Scroll down the page. Your page FTW. I saw the link in your sig, and I utilized the info after I installed my MSPNP and AEM. I changed the code to read what you posted and presto! both the gauge and the MS were reading the same. That was about 2-3 weeks ago. Sucks, I am still running on pretty much a base map with minor tweaks. |
I have one problem with the instructions on that other page. I found the msns-extra file and changed the line in that one according to the instructions, but then he says to edit my MSQ file. What msq file? Where do I find it/how do I open it to edit it? I thought msq's were the files that megatune opens up. Which I can't open up with notepad like I could with the msns-extra.ini file...
Help me out, trying to finish the second half of this so it all works in a/f. -Ryan |
Originally Posted by ThePass
(Post 258027)
I have one problem with the instructions on that other page. I found the msns-extra file and changed the line in that one according to the instructions, but then he says to edit my MSQ file. What msq file? Where do I find it/how do I open it to edit it? I thought msq's were the files that megatune opens up. Which I can't open up with notepad like I could with the msns-extra.ini file...
Help me out, trying to finish the second half of this so it all works in a/f. -Ryan However, thanks to you I am throwing my laptop in the car and I am going to go datalog a little bit. At 4.07 per gallon I think running 10.1:1 under boost is costly. Gonna trim it out a bit. Good luck. I havent really messed with the MSPnP yet, but I love it from day 1. No issues whatsoevah. |
You're useless ;)
So You just edited the msns-extra-ini file and it worked for you? Good luck on the tweaking - I just got done tuning the VE table for a few hours. Great stuff, this is one hell of a little box! -Ryan |
Your MSQ is the file that you open in megatune. Its just a text file though so open it in megatune if that's what needs to be done. I haven't done that mod in forever so I don't remember exactly what needs to be done.
|
All times are GMT -4. The time now is 11:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands