Notices
MEGAsquirt A place to collectively sort out this megasquirt gizmo

AFR's changing, no changes to fuel map

Thread Tools
 
Search this Thread
 
Old Mar 11, 2012 | 03:16 PM
  #1  
MartinezA92's Avatar
Thread Starter
Elite Member
iTrader: (4)
 
Joined: Aug 2009
Posts: 1,784
Total Cats: 42
From: Redwood City, CA
Default AFR's changing, no changes to fuel map

I've been fighting this for a long time and never got to a solution so I think its time to make a thread about it.

My target AFRs in boost were set to 11.5ish, and after some tuning I would see 11.2-11.4. Not bad. However, these values have moved all on their own.

In boost sometimes I will see 11.2, sometimes 10.9, and sometimes 10.4, which is way richer than I want to be. It doesn't really seem dependent on weather conditions, I have no leads as to why this is happening. This is all without ever even plugging my laptop into the MS. I have not changed anything. I'm going to retune tonight and see what happens over the next couple of days. I would say this is not an LC1 problem, I've gone through new sensors, rewiring, complete removal and reinstallation over the past 3 years and my AFR's never stayed stable for more than a couple weeks.

My question is: Has this happened to anyone else, if so, what did you do to fix this?
Old Mar 11, 2012 | 03:25 PM
  #2  
cardriverx's Avatar
Elite Member
iTrader: (12)
 
Joined: Jan 2007
Posts: 2,573
Total Cats: 12
From: Hermosa Beach, CA
Default

Sounds like you have some compensation messing with it (air temp, coolant, MAP, etc) or your fuel pressure is changing (but it would have to change a lot to do that). Take some logs and compare.
Old Mar 11, 2012 | 03:41 PM
  #3  
MartinezA92's Avatar
Thread Starter
Elite Member
iTrader: (4)
 
Joined: Aug 2009
Posts: 1,784
Total Cats: 42
From: Redwood City, CA
Default

Originally Posted by cardriverx
Sounds like you have some compensation messing with it (air temp, coolant, MAP, etc) or your fuel pressure is changing (but it would have to change a lot to do that). Take some logs and compare.
I still have not figured out how IAT and CLT compensation works. What would I be changing to make this problem go away?

Here are my settings.
How many people here are running the clt advance? I thought mine was on but I guess not.
I guess I'm gonna run some logs later, and then run VEAL after that.
Attached Thumbnails AFR's changing, no changes to fuel map-ms1.jpg   AFR's changing, no changes to fuel map-cltadvance.jpg  
Old Mar 11, 2012 | 09:13 PM
  #4  
MartinezA92's Avatar
Thread Starter
Elite Member
iTrader: (4)
 
Joined: Aug 2009
Posts: 1,784
Total Cats: 42
From: Redwood City, CA
Default

Wow. Well I never remember my logs looking this bad.

Observe/opinions?? Ignore the beginning I guess, I was stuck in an awkward traffic situation.
Attached Files
File Type: msl
2012-03-11_17.28.52.msl (337.9 KB, 118 views)
Old Mar 13, 2012 | 01:44 PM
  #5  
MartinezA92's Avatar
Thread Starter
Elite Member
iTrader: (4)
 
Joined: Aug 2009
Posts: 1,784
Total Cats: 42
From: Redwood City, CA
Default

Anyone? I've spent 3 hours searching and fiddling with stuff and have gotten nowhere.
Old Mar 14, 2012 | 10:12 PM
  #6  
cardriverx's Avatar
Elite Member
iTrader: (12)
 
Joined: Jan 2007
Posts: 2,573
Total Cats: 12
From: Hermosa Beach, CA
Default

I can't make sense of the log, there is no TPS, lambda, and whats up with the sudden drop in boost during the accel event at 3111 sec?
Old Mar 15, 2012 | 02:48 AM
  #7  
MartinezA92's Avatar
Thread Starter
Elite Member
iTrader: (4)
 
Joined: Aug 2009
Posts: 1,784
Total Cats: 42
From: Redwood City, CA
Default

That may have been me letting off, either that or overboost protection. I'm not really sure...

Yea, no vTPS. I was looking at AFR, not lambda.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Full_Tilt_Boogie
Build Threads
84
Apr 12, 2021 04:21 PM
ihiryu
MEGAsquirt
33
Oct 8, 2015 04:56 PM
lsc224
Miata parts for sale/trade
2
Oct 1, 2015 09:17 AM
MiataGarage
Engine Performance
5
Sep 29, 2015 11:04 PM
itsMikey
MSPNP
3
Sep 28, 2015 06:40 AM




All times are GMT -4. The time now is 10:13 AM.