combined my threads.....

 

With your laptop attached and Megatune / TunerStudio running, do you see an RPM indication on the screen while you are cranking?

Take a datalog while you are turning the starter and post it up. Let's have an MSQ file as well.

 

i should be using tunerstudio, obv correct? Im just going by a guide i found for the car...
http://www.boostedmiata.com/MS/msq/i...uctions_TS.pdf

It does run however now, ughm...It runs, then dies after approx 10 sec. idles high then stumbes and dies quickly.

 

did you wire your fuel-pump correctly? mine was doing that. it'd start, idle really high, then die. after like 4 attemps, i realized my FP was not running.
wired it, and it now runs no issues.

 

LOL! My fuel lines were backwards. Also, im wiring in all my guages, along with my wideband, hopefully ill have a answer in a bit

 

still! turns out my lines were fine. Its still not working, wideband installed aswell.

It just leans out after 5-10 sec of idle, and dies.

What is going wrong?

I wired the fp to gnd thing , did i do smth wrong?

 

i do have tach signal, if i nurse the car, midrange, it will run, sometimes

 

You're going to need to get your fuel tuning in order. There's several steps, so it's going to take a "manual sized" how-to:

http://www.msextra.com/doc/ms1extra/...ing_Manual.htm

 

combined