Cranking/Prime table
 

So now that I got my fuel table pretty much situated I need to get a better understanding of the Cranking settings. I know its diferent for everyone depending on where you live but if you could post up your settings it will help me out.

Here are my settings. In the morning when My IAT reads mid 70's it takes about 3-5 seconds for the car to start.

Thanks
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

I saw a good thread when searching for ASE and accel enrichments, but it would be great if this stuff was centralized. Obviously, that's going to take a lot of time and work.

what size injectors? very important.

550's
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

I don't have 550's, but I do have RX7 460's. You will need to take away a little more PW so you dont flood, but this is a good Cranking/ Prime table for me. I can't do a screen shot since the software is on the laptop. Since I live in FL I really didnt mess with the 0 and below. The 20 will be a rare occassion for us. Hope this helps a little.

20-6.2
40-5.5
60F-4.9
80F-4.1
100F-3.2
130F-2.5
160F-2.2

I heard someone say

I do not agree. Try these

PW tables arent that simple. You gotta start low and slow if doing from scratch. To high a PW the spark plugs get drenched and your fucked. You will continue increasing thinking your not their yet while your still drowning the plugs.

Sweet, Thanks for the info fellas.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote