DIY Base MSQ into HR?
 

Can I run the DIYautotune base map on the HR firmware?

Will I need to make any initial changes or are they completely compatible? I get 7 errors when loading it on 10G.

this one would be good to start for your setup in your sig....buyer beware.

braineack, any chance you have one for a stock 94 ac ps?

I should have mentioned I'm using stock 1.6 injectors and am bone stock.

In that case, the DIY maps are the closest y'all are going to get.

When transitioning from standard to HR, some re-tweaking of the VE table is necessary, however it's not like the car isn't going to run. As long as you've got a WBO2 sensor and have EGO figured out, you can start with the DIY base maps and let the system fine-tune them for you.