DIYPNP TPS Issues, HALP!
 

I recently built a DIYPNP MS2 with Microsquirt Module for my 99 Miata. Upon my first firing I noticed it wasn't reading the TPS properly. So, I pulled the unit back apart and checked my connections. I had an iffy connection between TPS and 4E, due to some wire shielding getting melted into the solder. I cleaned this up and now have continuity all the time. I have not put it back into the car yet, but I notice if I plug it into the computer, using the USB Adapter and a 12v supply, the TPS gauge just steadily climbs... Even though it has no input to it. It always has, but I am suspecting this is not normal?

If not, what should I start looking at?

This is normal.

Sweet. Ok, let's hook it back up and see if it works this time.

Thanks!

TPS works perfectly now! Now to start figuring out the tune and the Rad fans. Tune is utter shit and the rad fans don't seem to come on.