Originally Posted by Savington
(Post 75696)
I can only assume it is massively easier to hook up when you're not dicking with allowing MS to run things like idle, cold start, etc.
|
the board mods dont scare me... its knowing exactly what u have to have to make it work.. I havent seen any threads that take you from recieved MS (built ms box to plans) to hooked up and running great.
i build the kit.. test it with the stim, works good.. hook up the wires.. then what do i do? |
Originally Posted by adbradley
(Post 75767)
the board mods dont scare me... its knowing exactly what u have to have to make it work.. I havent seen any threads that take you from recieved MS (built ms box to plans) to hooked up and running great.
i build the kit.. test it with the stim, works good.. hook up the wires.. then what do i do? |
Originally Posted by Aussie Driver
(Post 75541)
And don't get yourselves too worked up over kingof1337's apparent disappearance. He went very quiet for a while this time last year as well. I can understand that some of you have a certain level of frustration over the situation, but this could rapidly get out of hand if people keep taking pot-shots at Adam without him having the chance to defend himself.
|
Aussie tellin it like it is. I think we're startin to sound like a broken record... it's not too hard, but you gotta be willing to read and learn.
Plus, when I finally got mine going correctly, (with Aussie's encouragement) I figured, now everyone can do it! What I'm sayin is I find it interesting that no-one (I think) has gotten an MS miata running since the writeups were written and everything was figured out. |
Originally Posted by brgracer
(Post 75771)
Didn't mean for this to come off as a pot-shot at Adam. I'm not sure I think that he's trying to rip people off....yet, but I would like to at least hear back something from him. I'm sure he's busy and maybe he bit off more than he can chew, but still then I'd at least appreciate a PM/e-mail/call (that takes less than one minute no matter how busy you are) saying that he's busy and it'll take a little longer. I'm not expecting daily updates or anything. In fact, at this point, if he's too busy, I'd just like my money and ecu back so I can get my car running again before the weather gets nice.
I guess I'm glad I am not the only one in this boat, just not happy to be in the situation at all. I check this site like eight times a day to see if I've had a pm from kingofl337 and it's getting old. end vent |
Originally Posted by Al Hounos
(Post 75778)
Aussie tellin it like it is. I think we're startin to sound like a broken record... it's not too hard, but you gotta be willing to read and learn.
Plus, when I finally got mine going correctly, (with Aussie's encouragement) I figured, now everyone can do it! What I'm sayin is I find it interesting that no-one (I think) has gotten an MS miata running since the writeups were written and everything was figured out. |
Originally Posted by miatamania
(Post 75816)
I will...;) Just as soon as my rear end goes in...and my clutch (however, I already paid for that)...and I buy a laptop...ouch.
https://www.miataturbo.net/forums/showthread.php?t=6966 |
Originally Posted by adbradley
(Post 75823)
Why not go for a setup like this? cheap e-bay tablet pc
https://www.miataturbo.net/forums/showthread.php?t=6966 |
Soldering is not hard at all, just go to the local Radioshack and pick up a soldering iron (~8$), solder (~4$), and a desoldering braid (~4$) and just practice soldering wires together, it's really not hard at all. There is nothing complicated about soldering up the MS board, there's no surface mount components, just as long as you can follow instructions (and I assume you can since you're going the MS router) you'll be fine. All you need for to solder the MS board is a little bit of practice. If you're worried about your skills, you can always start off on the MS Stim :)
|
his mods to the ecu case are not that difficult to perform. I would be glad to explain them to anyone via PM or e-mail. I didn't do it that way myself because I didn't want to modify the stock case incase I need to do a complete removal at some point. Mine is running an external switch box.
|
Holy sh*t Adam Martin is alive, I just got an e-mail from him. Unfortunately it seem he's forgotten who I was...
|
Originally Posted by Efini~FC3S
(Post 77994)
Holy sh*t Adam Martin is alive, I just got an e-mail from him. Unfortunately it seem he's forgotten who I was...
|
Post the email?
|
Damn im gonna have to go back to link being my favorite now to bad. With my mambo fingers electronics and circiut boards own me to bad.
|
Originally Posted by magnamx-5
(Post 78151)
Damn im gonna have to go back to link being my favorite now to bad. With my mambo fingers electronics and circiut boards own me to bad.
|
Originally Posted by adbradley
(Post 78155)
i think your just a pussy
|
2 Attachment(s)
DO these hands look like they do finnicky electrical work?
|
Hahahahahah
|
I too finally heard back from him, but I'll reserve any judgement until I actually have my MS in my hands.
|
All times are GMT -4. The time now is 02:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands