Does anyone have ID1050x injector calibration settings?
 

Thank you kindly.

Email ID. They had megasquirt specific info for the other series. I'm sure they can send out info for the 1050x.

Yep, they're awesome with customer service.
And I see you're looking to get the new hotness, which is good :)
I am looking to get a set for the sti too

Thanks, I'm sending a data request form soon.

Yeah I figured I'd get a cheap turbo and expensive injectors, rather than the other way around.

I'll post the results when I get them.

What do I fill out here?

2001 Miata LS. I read it's a 60psi non manifold referenced, but it measures 58psi? IIRC. Is this correct?

yes 60 +/- 2psi

I have asked Injector Dynamics Tech Support about NB non-MAP referenced returnless fuel system:

Ticket #32051
Question: "Please confirm: for non-MAP referenced returnless fuel system with 61psi base pressure I have to choose offset for 70psi(Differential Fuel Pressure during idling is 70psi=61psi fuel rail -(-9)psi manifold vacuum) "
Answer: "Confirmed. And given an offset error is largest when the pulse width is smallest, it will be best to use the offset data at 70psi in your situation, it's the best compromise.
Tony Palo, T1 Race Development,Injector Dynamics"

Did you get these running yet? I've got a set on the way to me, seems to be the new ballers injector.
Would like to hear how they work for you :)

They haven't sent the settings to me yet.

I also went back to the stock ecu for now.

Anyone happen to have these settings? I am looking to run 1050xs on my MS3 PNP pro here shortly.

they have 1050x settings posted for a while now on their site.
I've run them on several cars now

ahhh yes, found it. Megasquirt : Injector Dynamics Support

Thanks