Does this look like a vacuum leak?
Hey guys,
I finished building my MS (MS2/Extra, pretty much idential to the one in wiki guide). It seems to work. Now I'm in the process of setting up my idle. I disconnected the IAC and adjusted the idle screw until it idles at about 850rpm. That's great. However, the car starts strangely http://s95367906.onlinehome.us/mt.ne...3_19.32.53.png It cranks, sits at 500rpm for a few seconds then ramps up to 750, then slowly to 850rpm. Judging by the MAP curve and the fact that my MAP sits at ~40kpa, and vacuum gauge shows ~17psi of vacuum - I'm thinking small vacuum leak. Here's the datalog: http://s95367906.onlinehome.us/mt.ne...3_19.32.53.msl It also feels laggy when I rev it (also in the datalog) |
throw up the tune as well
|
http://s95367906.onlinehome.us/mt.ne...3_19.32.53.msq
Here's the tune. |
Turns out all the issues were due to a bad coilpack. So it was running on 2 cylinders. Replaced the coilpack, now it runs and idles smooth like butter :)
|
All times are GMT -4. The time now is 12:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands