Dwell - MS I vs. MS II
4 Attachment(s)
The Dwell settings on the base map for the MSPNP9495 are 4.4, and for their DIYPNP for the 9495, the dwell is set to 3.1.
Just curious why the difference? |
MSI wants the value at 12v -- MSII at 13.2v
|
What Dwell setting should I have.
I'm running MSII with Toyota COPs PNP kit. "dwell these at 3.5ms cranking, 2.5ms at 12v" That's for MSI? "Maximum Dwell Duration" same as "running Dwell" Thx |
Well you'll first go into the dwell battery correction table and do this:
See post here: https://www.miataturbo.net/showpost....75&postcount=8 and then you'll make the max dwell duration 2.2ms, cranking can stay around 5ms. |
Thanks again.
I will do it tonight. |
All times are GMT -4. The time now is 08:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands