Fuel flow cc # off ?
 

This seem to say I have FlowForce 640cc injectors .. putting out 660cc at 3.8 psi and 13.9 AFR .. that doesn't sound right to me.

Is it normal to see numbers that's a bit off during 'spikes' or do I have some bigger issues going on with my setup ?


https://cimg3.ibsrv.net/gimg/www.mia...a49e10e45c.png

On the card that came with mine I believe they were matched at 670cc

Okay I bought mine second hand so no card. Glad to know that there's some headroom over the rating though looking at these numbers I think I should be upgrading to 1000s. I bought these thinking they "will support 300whp+ on pump gas". :(

Pretty sure that fuel flow cc value is total of all four injectors (or however many you have). Check your injector duty cycle to see how much headroom you have.
I have the flow force injectors as well and a log showing a max of 1561cc/min

I dont know how your getting that.. on 20 psi with id1000's my max flow is like 700.

Yeah your number is about what I expect Ryan. My numbers seems really strange, and that's why I asked.

If it was total cc from all 4 injectors .. then that means each injector is putting out 165cc each .. which seems really low.