phocup

This seem to say I have FlowForce 640cc injectors .. putting out 660cc at 3.8 psi and 13.9 AFR .. that doesn't sound right to me.

Is it normal to see numbers that's a bit off during 'spikes' or do I have some bigger issues going on with my setup ?

matrussell122

iTrader: (1)

On the card that came with mine I believe they were matched at 670cc

phocup

Okay I bought mine second hand so no card. Glad to know that there's some headroom over the rating though looking at these numbers I think I should be upgrading to 1000s. I bought these thinking they "will support 300whp+ on pump gas". :(

Barton

Pretty sure that fuel flow cc value is total of all four injectors (or however many you have). Check your injector duty cycle to see how much headroom you have.
I have the flow force injectors as well and a log showing a max of 1561cc/min

ryansmoneypit

iTrader: (6)

I dont know how your getting that.. on 20 psi with id1000's my max flow is like 700.

phocup

Yeah your number is about what I expect Ryan. My numbers seems really strange, and that's why I asked.

If it was total cc from all 4 injectors .. then that means each injector is putting out 165cc each .. which seems really low.