GM Ebc woes
4 Attachment(s)
I've been working with Scott and Brian trying to figure this out and we think it's an MS problem.
I've hooked up the EBC in many different ways with my mbc and nothing seems to work. The last thing I did was hook it up alone without my mbc, and set my DC table to all 100's and it over boosts, I then tried all zeros and it still over boosts. I know the solenoid is working because it clicks when I wire it to the battery. I can blow through it when its disconnected and when it is connected it's obviously closing since I'm over boosting so the power feed is good. The only thing it could be is ms, but where in MS? The ms connection itself, a problem on the board or a problem with settings. Anyone? Attachment 204363Attachment 204364 Attachment 204365 Attachment 204366 __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Originally Posted by levnubhin
(Post 438486)
I've been working with Scott and Brian trying to figure this out and we think it's an MS problem.
I've hooked up the EBC in many different ways with my mbc and nothing seems to work. The last thing I did was hook it up alone without my mbc, and set my DC table to all 100's and it over boosts, I then tried all zeros and it still over boosts. I know the solenoid is working because it clicks when I wire it to the battery. I can blow through it when its disconnected and when it is connected it's obviously closing since I'm over boosting so the power feed is good. The only thing it could be is ms, but where in MS? The ms connection itself, a problem on the board or a problem with settings. Anyone? http://i19.photobucket.com/albums/b1...stsettings.jpg but i have a diff EBC http://www.diyautotune.com/images/pr...bc_sol_kit.jpg |
2 Attachment(s)
Tyson, My MS wont accept anything lower than 20 :dunno:
Here's the 2 of the 3 ways I tried running it. The last was was without the ebc. Attachment 204361 Attachment 204362 __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Swap one of the gauges to a BoostDCGauge. Are you actually getting 100% DC or 0% DC?
|
shouldnt the EBC and MBC be wired in parrellel?
|
Originally Posted by Matt Cramer
(Post 438498)
Swap one of the gauges to a BoostDCGauge. Are you actually getting 100% DC or 0% DC?
I don't see a BoostDCGauge. I see batADCGauge, boostgauge and 3 diff baro gauges. __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Originally Posted by levnubhin
(Post 438504)
I don't see a BoostDCGauge. I see batADCGauge, boostgauge and 3 diff baro gauges.
|
1 Attachment(s)
Could this problem be caused by an uncalibrated TPS?
Attachment 204360 __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Originally Posted by tyson87
(Post 438501)
shouldnt the EBC and MBC be wired in parrellel?
Find the other thread on this (Steins?) he finally got it working. |
Looks like youre missing the diode that DIY recommends be placed at the boost controller.
|
Originally Posted by tyson87
(Post 438501)
shouldnt the EBC and MBC be wired in parrellel?
Originally Posted by Spookyfish
(Post 438513)
+1
Find the other thread on this (Steins?) he finally got it working. __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Sam just pointed out to me that I don't have a diode at the solenoid like in this pic. Could that be the problem?
http://www.boostedmiata.com/MS/msebcwiring.jpg __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
|
Originally Posted by levnubhin
(Post 438486)
I've hooked up the EBC in many different ways with my mbc and nothing seems to work.
|
Originally Posted by evank
(Post 438654)
Did you try it Paul's way, as described in post 39 here: https://www.miataturbo.net/forum/t30067-2/#post389112 .... this works great for him, me, and probably others too.
My problem isn't how I'm hooking it up. MS isn't opening/closing it. I tried the most simple way (ebc alone) and nothing. __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Come to NY, bring ur MS with you lol. Ill sort it out.
|
Originally Posted by Saml01
(Post 438745)
Come to NY, bring ur MS with you lol. Ill sort it out.
Lol, suuuuuure. __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Sorry, that should have read "bcDCgauge" - that's what MT is calling it with MS1/Extra.
|
Originally Posted by Saml01
(Post 438514)
Looks like youre missing the diode that DIY recommends be placed at the boost controller.
|
Originally Posted by Braineack
(Post 438822)
look at the FET itself.
|
All times are GMT -4. The time now is 09:10 PM. |
© 2024 MH Sub I, LLC dba Internet Brands