Had MS out of car, wont start now?
 

Ive had the MS out of the car to copy my mods onto another MS for a mate, before I did, the car worked fine. Finished the new MS, tried it in the car with my map and it wouldnt start. So I changed back to my MS and now that wont start either? While I was checking to see if I was getting a spark, I had the lead 2nd from the bulkhead out and the car started, ran for maybe 15 seconds (not nicely I might add, but then it only had 3 sparks) and now wont start again.

Im getting all 4 leads sparking
Ive tried reflashing firmware (igniter out)
Sending a stock PNP map with just the req fuel adjusted for my injectors

Nothing is working.

Here are two logs from me cranking it.

[ATTACH]Attachment 12511[/ATTACH]

When the ignition is on, should I be hearing my fuel pump whirring?

yes

hmmmm

WUE LED isnt lighting?

Is the fuel pump coming on? Do you have spark?

Sigh...........This all seems irrelevant now cos the next day I went out to the car, reloaded map and it started. One of the many weird and wonderful things that happens with my ms :(

Fixed :jerkit:

Harsh and unfair, the lad obviously has an issue with his MS corrupting it's firmware/settings.

Rather than posting unhelpfullymaybe you could offer advice in what might be wrong?

The only thing I can think of is to check allthe solders around the ecu are good etc

yea your right... well what's done is done I was being honest no?