Hi,

I still have the same problem (lost sync reason : 32).
I replaced the cam sensor but it doesn't change anything.

Do you have any advice ?

Thank you

Wow, went for the big blower. This should be pretty awesome, looking forward to the dyno.

Please post a composite log of the loss of sync. This will give us more to go on.

Here is a composite log where you can see the lost sync.
Thank you

The lost sync never happens under 4000rpm. It is most of the time around 4200rpm and over when I step on the gas or when I'm staying at the same speed.

I'm seeing a clear signal. Try turning off all noise filtering in case it's filtering out the real signal.

Here is a composite log with a sync loss at the end. And a datalog. I hope it helps.

It doesn't seems that is a sensor issue.
Here is what I have in the noise filtering menu :

https://cimg1.ibsrv.net/gimg/www.mia...a9c07961ad.jpg

Hi arny,
have you been running with that issue for 4 years?

Hi Josh, unfortunately yes.. This is why I'm looking for a solution. I have read a lot of things about this problem but I can't find a solution since 4 years..

Ohh what a hell, you really love your 5.
if you live in France,I reccomend you visiting Autoracing workshop, for around 600€ they will tune your car in one of the best and reliable way. 1 year engine warranty. You have at least in Dijon and Bayonne. I will visit them just after installing the sc and Ic.
after 4 years of running 200hp and only been able to reach 4000 i dont want to imagine your impotence.
try to contact them and please let mw know what they tell you.
best luck buddy!
and please report the solution!!!

have you turned off noise filtering yet? i have yet to see an install that actually needs that and can cause problems better than curing them...

have you turned off noise filtering yet? i have yet to see an install that actually needs that and can cause problems better than curing them...