Help me get started, or stretch my bumhole. The input is appreciated...
Thread Starter
Junior Member
Joined: Sep 2015
Posts: 144
Total Cats: 20
From: Erie, CO
Help me get started, or stretch my bumhole. The input is appreciated...
Okay so I'm banging my head against the wall trying to get my car started after my ms3 install.
I have the original base tune sent with the unit by Braineack. I have altered the IAC frequency (as it was set wrong), set cranking fuel pulse rate to every other event (per the PO's recommendation), and fixed timing to +10. I can't figure out where I'm going wrong.
Attaching the current tune, log of a startup attempt, and a video of a startup attempt. In the video the first attempt is a normal start and the second is with a little bit of throttle, recommended by the PO.
Car is a 99, naturally aspirated.
I have the original base tune sent with the unit by Braineack. I have altered the IAC frequency (as it was set wrong), set cranking fuel pulse rate to every other event (per the PO's recommendation), and fixed timing to +10. I can't figure out where I'm going wrong.
Attaching the current tune, log of a startup attempt, and a video of a startup attempt. In the video the first attempt is a normal start and the second is with a little bit of throttle, recommended by the PO.
Car is a 99, naturally aspirated.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
