HELP! MS2 Enhanced compatibility question
I am building a turbo 1999 1.8L NB motor and I found this MS2 Enhanced for $400 locally. Can it be made to control my 1999 NB setup? I'm not afraid of a little work.
https://cimg1.ibsrv.net/gimg/www.mia...0cbe846972.jpg |
You could probably make up a wiring adapter to go from the male NB2 connector to the female NB1 ECU connector. Plenty of places to get the wiring pinouts to help you. Obviously you won’t need the VVT wiring.
Honestly, at $400 you should just go with a later MS3 made for your model. Other guys on here may have an easier way to do it. |
Originally Posted by bahurd
(Post 1556935)
You could probably make up a wiring adapter to go from the male NB2 connector to the female NB1 ECU connector. Plenty of places to get the wiring pinouts to help you. Obviously you won’t need the VVT wiring.
Honestly, at $400 you should just go with a later MS3 made for your model. Other guys on here may have an easier way to do it. |
Originally Posted by Manners226
(Post 1556938)
Thanks. That is what I am wondering. I can get an MS3Pro for $800, so that $400 is probably worth spending...
|
Originally Posted by bahurd
(Post 1556943)
I just noticed are you building an Exocet? If so, have you put a harness in the car yet? If not, just use the harness for the year ECU and don’t wire the VVT. Easy enough to figure out which wires for the NB1 engine goes to which in the NB2 loom.
|
All times are GMT -4. The time now is 03:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands