Help with vvt tune
08-27-2022, 01:55 PM
#1
Newb
Thread Starter
Join Date: Aug 2021
Posts: 3
Total Cats: -1
Help with vvt tune
Hey guys
i need help with my vvt tune
I have done a vvt swap from 92 1.6
now my problem is when is the car at idle and neutral i have some surging. And when i put in gear
everything works fine
Also when i unplugged the vvt is the same engine works like charm
😭😭 i want my vvt
i need help with my vvt tune
I have done a vvt swap from 92 1.6
now my problem is when is the car at idle and neutral i have some surging. And when i put in gear
everything works fine
Also when i unplugged the vvt is the same engine works like charm
😭😭 i want my vvt
Last edited by Galh; 08-28-2022 at 12:11 AM. Reason: more info
Reply
0
0
08-27-2022, 06:24 PM
#2
Senior Member
Join Date: Jun 2022
Location: Aliso Viejo, CA
Posts: 893
Total Cats: 182
You gotta attach the MSQ file for your tune, a datalog can help too. Otherwise, you'll either get ignored or flamed by the experienced guys on here haha.
If you post your tune/settings/log etc. and are very detailed with your questions, the guys on this forum can be very helpful.
I personally don't have any useful input on VVT settings. Just one newb trying to help another.
-Zak
If you post your tune/settings/log etc. and are very detailed with your questions, the guys on this forum can be very helpful.
I personally don't have any useful input on VVT settings. Just one newb trying to help another.
-Zak
Reply
0
0
08-31-2022, 08:36 PM
#3
Junior Member
Join Date: Jul 2016
Location: Orlando, FL
Posts: 381
Total Cats: 64
https://bartuneengineering.wordpress...l-setup-guide/
This is a good starting point.
You can also flatten out your table a bit to smooth out slow speed driving and make it not active when cold.
This is a good starting point.
You can also flatten out your table a bit to smooth out slow speed driving and make it not active when cold.
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
