How did you mount your MS?
I have been installing the MS in a friends car (1992) and mounting it seems to be a trade off between wiring safety and foot space.
Please post pics of your MS install. |
like this, just no stock ECU anymore: http://www.boostedmiata.com/gallery2...2/DSC01194.jpg
|
|
1 Attachment(s)
|
I put it right under the glovebox, upside down.
|
Originally Posted by cardriverx
(Post 606135)
I put it right under the glovebox, upside down.
http://www.boostedmiata.com/gallery2...2/IMG_3370.JPG |
mine is loose in the glove box.
|
Mine is under the carpet in the stock position.
|
Mine is zip tied upside down to the steering column above the gas pedal. It's out of the way of my foot, so it works well there. Then again I have a 99 so my stock ecu is in a different location than an NA.
|
Originally Posted by Pseudosport
(Post 606079)
|
Like this but not as messy anymore. Damn my cars changed since it took this pic.
http://photos-e.ak.fbcdn.net/hphotos..._7490370_n.jpg |
Mine is behind the seat, secured with double sticky tape.
|
1 Attachment(s)
|
Velcro'd to the passenger transmission tunnel. I got some crazy Velcro from radio shack for a couple bucks, that's not just the standard hoop and hook design. Would probably work on the carpet too. Keeps the LEDs visible as an added bonus.
|
Once I got over the fact that the megasquirt has LEDs on the front I just burried it under the floor pan like brain. I've done the transmission tunnel like curly, under the glove box and in the glove box and also just floating around on the passenger floorboard (bad). I like it hidden where I dont have to worry about it.
|
Originally Posted by curly
(Post 606308)
Velcro'd to the passenger transmission tunnel. I got some crazy Velcro from radio shack for a couple bucks, that's not just the standard hoop and hook design. Would probably work on the carpet too. Keeps the LEDs visible as an added bonus.
|
All times are GMT -4. The time now is 05:11 AM. |
© 2024 MH Sub I, LLC dba Internet Brands