obd code P1345
#1
Elite Member
Thread Starter
iTrader: (2)
Join Date: May 2007
Location: Cromwell, Connecticut
Posts: 2,604
Total Cats: 16
obd code P1345
Anyone else have this code show up on a 96 or 97? Im runnin ms1 in parallel with a boomslang harness..sharing all the signals. Ive had a CEL for a while, but just got to check it today
P1345 No CMP or SGC Signal (no camshaft position sensor signal)
P1345 No CMP or SGC Signal (no camshaft position sensor signal)
#2
I think I had that code once before. My crank sensor had a bunch of junk on it. The car would hesitate and stumble on acceleration before I figured it out.
I don't know if this is your problem since you have the megasquirt, but its easy enough to check.
It could also be possible that the crank sensor has come loose and moved. There is a proper way to align it. If you want to check that I can find the directions I have somewhere.
I don't know if this is your problem since you have the megasquirt, but its easy enough to check.
It could also be possible that the crank sensor has come loose and moved. There is a proper way to align it. If you want to check that I can find the directions I have somewhere.
Thread
Thread Starter
Forum
Replies
Last Post