I must be stupid or something. MegaLogViewer?
I bought both TS and MegaLogViewer.
Setup TS, got the MS connected. Ran a few runs with the logger going set to "Composite Logger" and it generates some CSV log files. I go to MegaLogViewer and open the log and all I see are the ignition logs. I can't seem to view anything else. I see this screen. http://www.efianalytics.com/MegaLogV...eLogViewer.png When I go to Scatter Plots there is nothing in the dropdowns to plot. When I go to any other tab there isn't anything there. I am such a friggin :noob: Am I using the wrong logging or something? |
at least you got that far; i get nothing at all
|
Go to the menu and select data logging/start logging. It will ask you to create a file name and then start logging. When done, open that file in MLV and win at life.
|
Originally Posted by dieselmiata
(Post 1119509)
Go to the menu and select data logging/start logging. It will ask you to create a file name and then start logging. When done, open that file in MLV and win at life.
I should use the menu option and that will give me what I want? |
That's what I do.
|
In TS, when you are connected to the ECU: Ctrl + L = start datalogging. It will ask you where you want to save the file and what you want to call it. Ctrl + B = stop datalogging. Load the file generated into MLV.
|
You and your fancy shortcuts...:party:
|
Well between talking on the phone and eating breakfast at 80mph in the 55 zone, I don't have time to use the menus to start a datalog ;)
Also there's no confusion with the composite logger if you use the shortcuts, so it might actually help OP. |
Alright, I got the thing to log the right logs. I am obviously just dumb for using that tab for ignition logging, but the dropdown menu worked. Thanks for pointing me in the right direction.
|
All times are GMT -4. The time now is 10:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands