So I need help getting me on the road. I just need to be able to start the car and drive it 4 hours to get to the dyno. I'll be running off a MS3 Basic for my 1999, E85, ID1000s, Garrett 2871r. It's a 1999. I just need help getting the basemap so that I can drive around. I don't know much about tuning at all. Let me know what other info you need to know.

 

AAA Tow, don't blow the car before it gets tuned.

It's e85 only?

 

I can help, but I'm not free. Hit me up if you don't find any better options. I've e-tuned quite a bit of ID1000+turbo+e85 MT.net Miata's at this point.

 

I'll PM soon lol

 

Just wire wastegate open. Hard to blow a car that doesnt boost.

 

1. Download base map.

2. Set up req fuel calculator for your engine size and injector size. Then multiply by 1.3.

3. VE analyse live around your neighborhood with your wastegate wired open.

If you don't have ve analyse live, drain your oil, and add the special sodium silicate lubricant.

 

+1 18psi just finished remote tuning my car and it runs perfect!