5ms dwell at idle, 3ms above 2k
#1
5ms dwell at idle, 3ms above 2k
The stock 99 ECU appears to use a 5ms dwell below 1000rpm and taper linearly down to 3ms above 2000rpm. To do the same thing in MS I added the following lines:
if (outpc.rpm < 1000) {
utmp2 += 20;
} else if (outpc.rpm < 2000) {
utmp2 += (2000 - outpc.rpm) / 50;
}
after:
utmp2 = flash4.max_coil_dur;
in ms2_extra_main.c. I'm using the 2.1.0d code base. I was hoping to solve the rolling idle problem I've had for years now but it didn't work. It does seem to have improved my acceleration out of idle but that's difficult to say for sure since I've been re-tuning everything including accel enrichment.
Just thought I'd post this in case someone else could find it useful.
if (outpc.rpm < 1000) {
utmp2 += 20;
} else if (outpc.rpm < 2000) {
utmp2 += (2000 - outpc.rpm) / 50;
}
after:
utmp2 = flash4.max_coil_dur;
in ms2_extra_main.c. I'm using the 2.1.0d code base. I was hoping to solve the rolling idle problem I've had for years now but it didn't work. It does seem to have improved my acceleration out of idle but that's difficult to say for sure since I've been re-tuning everything including accel enrichment.
Just thought I'd post this in case someone else could find it useful.
Thread
Thread Starter
Forum
Replies
Last Post
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM
JesseTheNoob
DIY Turbo Discussion
15
09-30-2015 02:44 PM