Impossible to program LM Programmer (?)
2 Attachment(s)
My MS tuning career just won't take off! :mad:
A couple of days ago I was on my way to start tuning the VE table after some initial trouble with the AFR-reading (due to wrong wiried analog output from the lc-1). When I started the car I didn't think of the odd readings in MS of the AFR (I also have a gauge showing AFR) but when I looked at the log there was something wrong - the AFR's! Attachment 6895 I'd look at the LC-1 via LM Programmer, my set up of 0-5v : 10-20 afr was gone and replaced by the factory settings. I'd try to reprogram the settings once again and clicked "Program". Same thing, as soon as I closed the program my settings was replaced by factory default. I just cant get the LC-1 to save my 0-5v : 10-20 afr settings. As far as I can understand it must be some problems between my laptop and the LM Programmer software. When I'd change the settings in MegaTune the AFR-readings on MegaView looks fine (or at least like readings). I know I have some tuning to do (It looks like I run mega rich and I'm certainly do, but I'll check my accel enrichments and read some more before asking questions about that... ;) ). Attachment 6896 Anyone ever heard of this problem I've tested with my laptop running Vista but also with another laptop running XP. The terminator plug is in. Thanxs! |
I cant even get my laptop to connect to my LC-1 :(
|
Originally Posted by richard_ha
(Post 262048)
I cant even get my laptop to connect to my LC-1 :(
|
FWIW i was having the same problem before i switched to the UEGO. You might check out the innovate forums or call them, there is supposed to be one really good guy over there Felipe i think is his name.
|
Originally Posted by wes65
(Post 262228)
FWIW i was having the same problem before i switched to the UEGO. You might check out the innovate forums or call them, there is supposed to be one really good guy over there Felipe i think is his name.
Felipe is really a good guy. He sent me a replacement unit a couple of weeks ago when my first LC-1 didn't work at all. Thanks |
Contact Innovate on this one, although you might try loading the older version of the LC-1's firmware first and see if that helps.
|
Originally Posted by Matt Cramer
(Post 262716)
Contact Innovate on this one, although you might try loading the older version of the LC-1's firmware first and see if that helps.
Thanks Andreas |
Can you point me to where you found it please?
|
1 Attachment(s)
Originally Posted by richard_ha
(Post 262926)
Can you point me to where you found it please?
I also attached the firmware here :) Attachment 6913 Andreas |
Thanks, I'll give that a go
|
You could also just add the default AFR/Voltage range to MLV and Megatune? (as a workaround)
|
Originally Posted by smifta
(Post 263201)
You could also just add the default AFR/Voltage range to MLV and Megatune? (as a workaround)
/a |
Ok guys, problem solved. I finally succeed programing my LC-1 with LM Programmer.
How? Well, I would say that my best tips is to buy a really good USB to serial adapter. First, I tried to load the old firmware (1.0). The firmware update was easy but it didn't help. Then I tried programming the LC-1 with my old laptop (with a serial DB9 port). Didn't work. I concluded that wasn't the firmware that was the problem. I re-updated the firmware (1.10) and tried again using my old lap top. This time it worked! I tried to program the LC-1 with different values using this set up (old lap top + firware 1.10) and now it works every time. Even though I'm not sure why it didn't work when I tried with the old laptop before updating and re-updating the firmware I'm convinced that problem is the USB to serial adapter. If you're planning to buy a LC-1, buy Innovates adapter if you don't have a laptop with a serial port (DB 9). Thanks for your help! |
I had the same thing happen. Though in my case it definitely wasn't the usb since I'm running directly to a serial port on my laptop.
My fix was using the older version of LM Programmer posted on your innovative thread. LM Programmer 3.19 did not save my settings, and actually corrupted my calibration. |
Originally Posted by BenR
(Post 276403)
I had the same thing happen. Though in my case it definitely wasn't the usb since I'm running directly to a serial port on my laptop.
My fix was using the older version of LM Programmer posted on your innovative thread. LM Programmer 3.19 did not save my settings, and actually corrupted my calibration. |
The newest LM Programmer just flat didn't work for me. Thanks for starting that thread on the innovative board.
|
All times are GMT -4. The time now is 01:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands