Injector connector/plug
Where can I buy fuel injector connectors/plugs for my stock miata injectors?
I dont want to hack into the factory injector wiring so i would rather buy new connectors and make my own wiring. TIA |
Why not just get injectors from the FAQ that plug in?
|
+1 on a PnP injector...
you can find pigtails anywhere however... |
i wasn't able to remove the FI harness from my car. one of its connectors is behind the head, and I was afraid that I would not be able to reconnect it to the new harness. so I put new injector clips on my original harness. took 10 minutes to make the 8 connections, plus another 5 to tape it all up to look like stock.
|
+1 i just used bullets on mine so it was reversable.
|
I want to use my existing injectors and I want to make a dedicated wiring harness for the injectors that would be connected to my megasquirt system.
|
so you want to run 8 injectors? i dunno if you can do that staged.
|
Originally Posted by RdSnake
(Post 116104)
I want to use my existing injectors and I want to make a dedicated wiring harness for the injectors that would be connected to my megasquirt system.
|
i think he has injectors other than the oem ones....
it's easier just to wire in the pigtails...then just use the ones you need. so you have a total of 8 clips, but 4 injectors... |
Originally Posted by RdSnake
(Post 116104)
I want to use my existing injectors and I want to make a dedicated wiring harness for the injectors that would be connected to my megasquirt system.
|
Originally Posted by Braineack
(Post 116110)
i think he has injectors other than the oem ones....
and say "please" and "thankyou" |
:rofl:
|
I have a stock injector harness (not sure if it's the 94 or the 2000 o.O) that I think I'm going to cannibalize for the plug that interfaces to the main harness. I suppose I could sell the stock connectors (actually, I could sell pretty much the whole harness minus the connector at the end). What's your budget?
-Mike |
Originally Posted by grippgoat
(Post 116129)
I have a stock injector harness (not sure if it's the 94 or the 2000 o.O) that I think I'm going to cannibalize for the plug that interfaces to the main harness. I suppose I could sell the stock connectors (actually, I could sell pretty much the whole harness minus the connector at the end). What's your budget?
-Mike |
Lets simplify the question:
I am looking for injector connectors. where can i buy them? I dont want to cut and plice into the existing factory injector wiring harness. that was easy! |
which injector connectors?
DSM, FORD, etc. |
Just pull them from the car that has the injectors you want. but seriusly unless you want to run some non PNP injectors why change. And if you are then why does 8 wire splices scare you so we run batch fire injection geez. The harness comes off the car easily, and the wires are just wires. Why make more work?
|
Originally Posted by RdSnake
(Post 116159)
$20.00 plus postage? i need to find out what year its from though. I dont know if 1.8 connectors are compatible with 1.6 injectors.
|
Originally Posted by Braineack
(Post 116165)
which injector connectors?
DSM, FORD, etc. 90 mazda miata 1.6l engine |
Originally Posted by RdSnake
(Post 116178)
90 mazda miata 1.6l engine
|
All times are GMT -4. The time now is 11:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands