Hey,

I am trying to figure out what dead time value to use at 13.2v and the voltage msec/v offset, for these Bosch EV14 750cc injectors i have.

The values i have to work with are the dead times at these voltages and 43.5psi fuel pressure.

8v- 1.92
10v- 1.33
12v- 1.03
14v- .77
16v- .69

My math suggest .92ms dead time and .15msec/v voltage correction.

Let me know what you guys think, thanks in advance!

 

0.92ms looks about right just eyeballing it, but it's not going to be a linear curve. You need to convert everything into an expression of percentages of 0.92ms, then feed that data into the MS3.

 

I am using and older MSPNP 1, should have mentioned that in the first post. The opening time at 13.2v and voltage correction is all i need.