Intake Temp -40F
#42
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
Back from the salt...
FYI to all, anytime you see -40 on your temp sensors (IAT or CLT) it's not connected... that's the default temp MegaTune will show for an unconnected sensor. So it's either wiring, or 'could' be a bad sensor though that's pretty rare. Usually wiring...
Glad it's sorted Ben!
FYI to all, anytime you see -40 on your temp sensors (IAT or CLT) it's not connected... that's the default temp MegaTune will show for an unconnected sensor. So it's either wiring, or 'could' be a bad sensor though that's pretty rare. Usually wiring...
Glad it's sorted Ben!
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
#46
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
So you're using GM CLT and IAT sensors? And 2.2ohm resistors for bias on both R4 and R7?
Did you put the .inc files in the proper folder in MegaTune after Easytherm generated them?
airdenfactor.inc
matfactor.inc
thermfactor.inc
All three need to go in:
C:\Program Files\MegaSquirt\car1\mtCfg
or the mtcfg subdir under whatever project folder you're using... I used car1 in this example as it's the default.
Did you put the .inc files in the proper folder in MegaTune after Easytherm generated them?
airdenfactor.inc
matfactor.inc
thermfactor.inc
All three need to go in:
C:\Program Files\MegaSquirt\car1\mtCfg
or the mtcfg subdir under whatever project folder you're using... I used car1 in this example as it's the default.
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
#48
I have the 2.490 in for CLT and mazda sensor. r4
I have a 2.2 in for IAT and the GM sensor. r7 (i had pulled/damaged r7 per misreading advice, and could only find a 2.2 locally)
I get 2.4v (at least on last check) with the GM sensor and a generic replacement i tested the other day. Both were reading about -14c on a nice 24c (clt reading) day.
I've also moved the .inc files to the proper location after creation.
I have a 2.2 in for IAT and the GM sensor. r7 (i had pulled/damaged r7 per misreading advice, and could only find a 2.2 locally)
I get 2.4v (at least on last check) with the GM sensor and a generic replacement i tested the other day. Both were reading about -14c on a nice 24c (clt reading) day.
I've also moved the .inc files to the proper location after creation.
#50
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
grrr.... 211mph with 2 cylinders acting up-- valvetrain issues. We dropped an exhaust valve on that 211mph run yesterday and holed a piston.
But as they say, That's racin' -- we'll try again
The Buick set 2 records in slower classes in the 135-142mph range. They were going back for a 3rd today.
Freiburger's car (Hotrod Special) had set 2 and was going back for a 3rd as well.
But as they say, That's racin' -- we'll try again
The Buick set 2 records in slower classes in the 135-142mph range. They were going back for a 3rd today.
Freiburger's car (Hotrod Special) had set 2 and was going back for a 3rd as well.
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
#52
Supporting Vendor
iTrader: (5)
Join Date: Jun 2006
Location: Duluth, GA 30097
Posts: 803
Total Cats: 0
Sorry-- I should have clarified... that was a twin-turbo 515ci Studebaker-- MS'd though
It's the one on our website.
I'm toying with the idea of building a landspeed car-- I've got to scour the rulebooks and recordbook to see what makes sense. If a Miata makes sense that would be cool. I'd love it actually. I know there was one that ran a while back and did 152mph but I'm not sure if he ever came back for more.
It's the one on our website.
I'm toying with the idea of building a landspeed car-- I've got to scour the rulebooks and recordbook to see what makes sense. If a Miata makes sense that would be cool. I'd love it actually. I know there was one that ran a while back and did 152mph but I'm not sure if he ever came back for more.
__________________
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Jerry a.k.a. 'FoundSoul'
DIYAutoTune.com
'91 Miata BEGi S3 GT2560 w/ MSPNP - 14.1psi - 253whp, 232wtq
'95 Miata n/a
A few other cars....
Thread
Thread Starter
Forum
Replies
Last Post