Knock during startup and warmup normal?
4 Attachment(s)
My megalog viewer shows knock in all cylinders around 3.6-4 during warmup. During startup, I get crazy amount of knock in the 30s, but this event only lasts for a second or two. Is this normal?
I'm not sure how sensitive the MS3 is but are all logs supposed to read 0 knock at all times? Should I be really concerned? My timing is very conservative and I've tuned fixed tables. Rev MS3, 2003 Miata all stock. I've attached a startup and die log (Idledie) and my tune. I'm hoping I can get some input here. I'll have the warmup log soon, my current one is a bit too big. Not sure why I'd be knocking with my settings. |
"Knock" readings on startup may actually be measuring piston slap until the pistons get up to operating temperature.
|
I'm still getting knock at ~3.6-4.0 during regular driving in ALL cylinders. They seem to move with each other. Is this normal? Should I be worried about knock at these levels?
Thanks. |
This is just noise. I wouldn't worry about knock below 15-20%.
|
All times are GMT -4. The time now is 12:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands