Knocksense
#4
My friend has it on his car right now. It's a very professional piece, main issue is getting it "tuned' correctly. Tuning the knock threshold is a little difficult, we just need to buy some serious race gas, tune it so it never goes off with that, and then once we put in pump gas, if we see it light up, then we know we have knock.
#5
Elite Member
Thread Starter
iTrader: (13)
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,091
Total Cats: 7
Interesting.
I'm trying to figure out all the mods/options that i'm ever going to want to use MS for and i know I want a knock sensor. I hate taking the MS out of my car and figure i should finish all my mods in one whack. That includes: Boost Control, Launch Control, EGT, Knock, GM IAT and heck i might even decide on one more thing but we'll see.
I'm trying to figure out all the mods/options that i'm ever going to want to use MS for and i know I want a knock sensor. I hate taking the MS out of my car and figure i should finish all my mods in one whack. That includes: Boost Control, Launch Control, EGT, Knock, GM IAT and heck i might even decide on one more thing but we'll see.
#6
You could always build the circuit on the MSnS-extra site:
http://megasquirt.sourceforge.net/extra/knock.html
Reverant is running it with success. I've got all the parts to build it but I'm not motivated at the moment.
http://megasquirt.sourceforge.net/extra/knock.html
Reverant is running it with success. I've got all the parts to build it but I'm not motivated at the moment.
#7
My friend has it on his car right now. It's a very professional piece, main issue is getting it "tuned' correctly. Tuning the knock threshold is a little difficult, we just need to buy some serious race gas, tune it so it never goes off with that, and then once we put in pump gas, if we see it light up, then we know we have knock.
Run the car to redline with out going into boost, any events you record SHOULDN'T be knock but regular drivetrain noise. Set the thershold of your device accordingly.
#8
Elite Member
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,977
Total Cats: 356
Anyone using this product?
http://www.viatrack.ca/
http://www.viatrack.ca/
Jim
#10
Elite Member
iTrader: (1)
Join Date: Jun 2006
Location: Warrington/Birmingham
Posts: 2,642
Total Cats: 42
I like it, though tuning it has been a bit of a ball ache, it's still not 100% :(
#13
Elite Member
Thread Starter
iTrader: (13)
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,091
Total Cats: 7
Thanks.
Could I also use just the knocksense circuit and then hook it up to my stock sensor? Seeing how the knocksense is premade, in a nice box and as said before, better filtered. I think it would just be easier/cleaner for me to go that route.
Could I also use just the knocksense circuit and then hook it up to my stock sensor? Seeing how the knocksense is premade, in a nice box and as said before, better filtered. I think it would just be easier/cleaner for me to go that route.
#16
Elite Member
Thread Starter
iTrader: (13)
Join Date: Oct 2006
Location: Atlanta, GA
Posts: 8,091
Total Cats: 7
I'll contact them and see what they say. That would be awesome if that setup worked.
Are you just datalogging knock or do you have it acting when it hears knock as in pulling more timing?
Are you just datalogging knock or do you have it acting when it hears knock as in pulling more timing?
#17
Elite Member
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,977
Total Cats: 356
I'm retarding automatically as well, 2* on the first knock, 1* for each subsequent knock, 5* max. I'm running N/A 10:1 and if I fail to get 100 octane gas, it pings at certain RPM zones, mostly between 2000-4000.
Jim
Jim
#20
I know the NB are more knock prone due to the higher compression ratio, but still you must be running extremely aggressive advance mate.
As a indication, last summer i was running at 6psi without IC or WI, at 14btdc and using the stock timing curve.
And i was using normal petrol.
It's also very strange that your getting knock at THAT low a revs.
I've seen and played with various FI's and N/A 5's and i've never seen one knock below 4000rpm.
Nearly every single one starts knocking around peak torque (4200rpm).
If it was me i'd retard the timing a bit and see if it still knocks, as Richy say's it might just be engine noise.
Cheers
Mark