Megalog Viewer not letting me run analysis?
Hey guys,
New here, but figured I'd come asking for your collective wisdom sooner rather then later. I just installed a MSPNP2 in my naturally aspirated 93 and have been data-logging the past few days so I can make sure I'm hitting my ideal AFR table, but for some reason I keep running into the same error when I try to run an analysis. https://cimg0.ibsrv.net/gimg/www.mia...f0fbe7a089.jpg The write ups I've read and tutorials on Youtube (TheCarPassionChannel) said you don't have to change any settings to run the analysis, but I keep getting this error when I try to run any logs under any driving conditions. Are there settings I need to change in TunerStudio before datalogging? Or something I must change in Megalog Viewer? If it makes any difference, I am running a Innovate MTX-L wideband gauge/sensor, and sensor was just recalibrated. . Any help or guidance is greatly appreciated! Thanks, Ben |
~Bump~
I guess everyone is as stumped as myself. I'm going to try completely reloading the untouched basemap from the driver and see if that helps the issue. Maybe a certain setting got messed up somewhere along the way? |
Post (upload) your log and your tune. Then we have something to evaluate.
|
I would start with doing what the error suggests. Do you have a filters that seem out of whack?
Also, do you not own tunerstudio? Is that why you're using megalog to analyze instead of VEAL? It's well worth the $70 to have VEAL tune in real-time. |
1 Attachment(s)
So update, I completely started over with the original basemap and it turns out I had a few settings I forgot to adjust on initial start up of the car.
Original issue of VE Analize has gone away, although I cant really run the car long enough to datalog due to the following reason. I believe I have all the base settings set up, but now the car starts, idles around 2500-3000rpms, and sits at 19-20AFR, so I must be missing something?
Originally Posted by DNMakinson
(Post 1444488)
Post (upload) your log and your tune. Then we have something to evaluate.
Originally Posted by Onyxyth
(Post 1444490)
I would start with doing what the error suggests. Do you have a filters that seem out of whack?
Also, do you not own tunerstudio? Is that why you're using megalog to analyze instead of VEAL? It's well worth the $70 to have VEAL tune in real-time. |
For the new issues:
|
Originally Posted by Onyxyth
(Post 1444572)
For the new issues:
|
All times are GMT -4. The time now is 12:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands