megaspooge acting odd (leds)
 

I fucked my firmware flash up (battery ran out) and now when I turn on my MS only the middle light comes on. What does this mean? Should I just try out the hyperterminal shit? I can't get connected to the thing anymore. I'm using a regular serial port now so my usb>serial issues aren't a problem.

MS is a Braineack one.

reflash again?

I put in the boot jumper and tried to reflash from easytherm, but I get no connectivity. I'm positive about the com port/cable/etc working fine, tested that stuff with another piece of equipment.

Hyperterminal is my only option,yes?

edit: when I don't have the boot jumper on, the middle led turns on when I turn the ignition to ON. When the boot jumper is in, I get nothing.

alright so I connect with hyperterm and when I turn on the MS, I get the boot prompt. However, I get no response from any keyboard inputs.

ideas? I'm seriously thinking about just getting an afpr and saying fuck it.

Have you tried holding the boot jumper shorted and flashing it back to the base Megaquirt firmware, then going to whatever custom ou run?

My MS 1 chip keeps freaking out once every 60 connections or so to Megatune, and I just hit the boot jumper (I have a switch on it now) and reflash the firmware I run (MSNSE).