Tacho output on 99 MS2
#1
Tacho output on 99 MS2
Is this circuit ok as tacho output? 12V ok? 1K resistor ok?
Where do I wire it to on the tacho? The factory wiring manual isn't very clear about this as speed and tacho come from a processor inside the cluster. Am I supposed to I hook it up directly to the tacho itself?
I found several older threads that talk about the tacho, but nowhere could I find where exactly to wire it to.
I completely forgot about the tacho when 'designing' the circuits on the proto area. I'll have to get creative to find a useable spot on the board .
I there a way to make a tacho output without having to free up an output? Everything is used already so I'll have to give up the output for WI or EBC .
Where do I wire it to on the tacho? The factory wiring manual isn't very clear about this as speed and tacho come from a processor inside the cluster. Am I supposed to I hook it up directly to the tacho itself?
I found several older threads that talk about the tacho, but nowhere could I find where exactly to wire it to.
I completely forgot about the tacho when 'designing' the circuits on the proto area. I'll have to get creative to find a useable spot on the board .
I there a way to make a tacho output without having to free up an output? Everything is used already so I'll have to give up the output for WI or EBC .
Last edited by WestfieldMX5; 05-10-2009 at 03:42 PM.
#2
Elite Member
iTrader: (1)
Join Date: Jun 2006
Location: Warrington/Birmingham
Posts: 2,642
Total Cats: 42
That's the circuit I used, works perfectly. From looking at the wiring diagrams, it does indeed look like you're going to have to cut directly into the processor.
Though wait a second, if the taco is driven by a processor on the cluster shouldn't it just work anyway? If not it looks to drive more than the tacho, you're going to be down an odo and speedo too?
Though wait a second, if the taco is driven by a processor on the cluster shouldn't it just work anyway? If not it looks to drive more than the tacho, you're going to be down an odo and speedo too?
#3
Well, I really don't know. I would think that the processor in the cluster gets it's signal from the ecu, but I'm not sure what signal that is and where to connect it to.
I was thinking of soldering tacho out directly onto the tach inside the cluster and cutting the existing circuit to the processor.
I was thinking of soldering tacho out directly onto the tach inside the cluster and cutting the existing circuit to the processor.
#4
Elite Member
iTrader: (10)
Join Date: Jun 2006
Location: Athens, Greece
Posts: 5,979
Total Cats: 356
Tacho: The cluster processor takes the signal from the ECU and converts it to SIN+,SIN-,COS+,COS- for the tacho gauge to work.
Speedo: The cluster processor takes the signal directly from the gearbox (2-wire VR sensor) and converts it to 50% DC variable frequency square wave for the ECU and SIN+,SIN-,COS+,COS- for the speedo gauge.
Your speedo will work fine as-is. You have to do the tacho output mod and connect it to the proper wire on the cluster harness. On the 2001+, the tacho is NOT driven off the coils, so we can just connect the tacho output to pin 3O on the ECU harness. I don't know about the 99.
Jim
Speedo: The cluster processor takes the signal directly from the gearbox (2-wire VR sensor) and converts it to 50% DC variable frequency square wave for the ECU and SIN+,SIN-,COS+,COS- for the speedo gauge.
Your speedo will work fine as-is. You have to do the tacho output mod and connect it to the proper wire on the cluster harness. On the 2001+, the tacho is NOT driven off the coils, so we can just connect the tacho output to pin 3O on the ECU harness. I don't know about the 99.
Jim
#8
Boost Pope
iTrader: (8)
Join Date: Sep 2005
Location: Chicago. (The less-murder part.)
Posts: 33,072
Total Cats: 6,625
You know, I think you're right. I've had black/white on the brain lately as that's the standard tach wire in the earlier cars, but now that you mention it, the grn/org wire at 2K probably is the correct one.
Damn NBs and their modern color-codes... :rolleyes"
Damn NBs and their modern color-codes... :rolleyes"
#9
I just had a look at both wiring diagramms for the 1999-2000 and for the 2001-2004.
2K at the 1999-2000 is g/o and goes to the instrument cluster and to the diagnostic connector.
3O at the 2001-2004 is also g/o and also goes to the instrument cluster and to the diagnostic connector.
Should be it then...
2K at the 1999-2000 is g/o and goes to the instrument cluster and to the diagnostic connector.
3O at the 2001-2004 is also g/o and also goes to the instrument cluster and to the diagnostic connector.
Should be it then...
Thread
Thread Starter
Forum
Replies
Last Post
Zaphod
MEGAsquirt
47
10-26-2018 11:00 PM
StratoBlue1109
Miata parts for sale/trade
21
09-30-2018 01:09 PM