Dont worry, well put in a clutch delay valve to make sure you cant shift a bmw well.

Hyundai does the same thing....


Don't ask me how I know. I was a misguided youth once...

2 3 pages, 3 pictures... this thread does not deliver. F- :rofl:

I can fix that!

The car isn't finished but you get the idea. It is just mounted to a piece of angle that is attached to the dashbar support. Like I said before I have no idea if this can be done on OEM harness. I have rewired the whole car, which is evident by the fuse box on the tranny tunnel. Yes, I like switches... lol

https://www.miataturbo.net/attachmen...ine=1356049629

Attachment 239760

Here's a better picture. This is with the factory harness. It was pretty easy to make it work since Rev's PNP harness he made for the MS3/MS3x had some extra length (giggity). I also wired all of the free hanging wires from his harness for things like the WB02 and seq. fuel and spark inputs to a Deutsch connector so the whole thing can be easily removed. The button to the left is to start and stop data logging to the SD card.

Hope that helps. I remember a thread where people were posting up info about SD card slot extenders and USB extender cables. I had originally planned to go that route with something under the passenger side dash, but this just made the most sense for my application.

Nice! I really need to find a source for black ABS. I have like 6 projects where it could be useful.

Well damn, that's frickin' cool. Is the push button part of the default functionality of the MS3/MS3x? That sounds REALLY convenient.

Or better yet, just go dumpster diving at your local plastics shop and get all you want for free. That's what I did when I wanted to fab up a custom gauge panel and found some nice 1/4" black plastic to use.

Ray