MS v2.2 to a DIYBOB wiring
So I had a MS diypnp and it caught on fire. :c (most likely due to a short from the coilpack finding its way back to the ECU)
Luckily I have a fully built (albeit old) MS v2.2 board and the DIYBOB. I only plan on using the ecu for fuel and spark. Nothing more. No launch control, flat shift, etc. Only things beside a turbo is a vtps and wideband. So I think I have the right wires going to where they need to be, but would like some help and/or double checking before I make the connections. This is for a 1991. DB37 -> DIYBOB Pin 30 -> 4W 32 & 33 -> 4V 34 & 35 -> 4U 21 -> 4Q (CLT) 37 -> 4O (fuel pump) 20 - > 4P (IAT) 22 -> 4L (TPS) 25 - > 4G 24 -> 4E 16 - 4C (grnd) 17 - 4D (grnd) 18 - 4A (grnd) 19 - 4B (grnd) 29 -> 1R (Fans) 26 -> 1N (5vref) 31 -> 1G (Ignitor) 36 -> 1H (Ignitor2) 28 -> 1B (12V) 23 -> 4N (o2) Hopefully I am not missing anything here. |
bump. Still looking for help/reassurance.
|
looks correct.
|
All times are GMT -4. The time now is 04:53 AM. |
© 2024 MH Sub I, LLC dba Internet Brands