MS1 With MS2 Daughter Board HELP
 

I bought an old MS1 the guy that sold it to me claimed the mighty Braineack himself put it together back in 2012. I threw it in the car and it starter and ran. So I knew the ECU was good. Then I bought the MS2 daughterboard threw it in and I was able to load the firmware and everything seemed ok until I went to start the car. It turned over and I got nothing. I put a long screwdriver on the fuel injectors and I could hear them firing and I could smell fuel so I know that I am getting fuel and the injectors are firing. So then I went to check spark and I got nothing.

https://cimg2.ibsrv.net/gimg/www.mia...2003cd45fa.jpg
https://cimg4.ibsrv.net/gimg/www.mia...cb44aa253e.jpg
https://cimg6.ibsrv.net/gimg/www.mia...ce1f742c0d.jpg
That's the board as it sits now. Does anyone see anything wrong or missing? Any help would be greatly appericeatied. Thank you for your time.