MS1 With MS2 Daughter Board HELP
#1
MS1 With MS2 Daughter Board HELP
I bought an old MS1 the guy that sold it to me claimed the mighty Braineack himself put it together back in 2012. I threw it in the car and it starter and ran. So I knew the ECU was good. Then I bought the MS2 daughterboard threw it in and I was able to load the firmware and everything seemed ok until I went to start the car. It turned over and I got nothing. I put a long screwdriver on the fuel injectors and I could hear them firing and I could smell fuel so I know that I am getting fuel and the injectors are firing. So then I went to check spark and I got nothing.
That's the board as it sits now. Does anyone see anything wrong or missing? Any help would be greatly appericeatied. Thank you for your time.
That's the board as it sits now. Does anyone see anything wrong or missing? Any help would be greatly appericeatied. Thank you for your time.
Thread
Thread Starter
Forum
Replies
Last Post
MR.M!474
Miata parts for sale/trade
6
09-16-2012 01:44 PM