ms2 enhanced, color wire quiz
 

Hi!! As I haven´t got the inst. manual I need to ask where must i solder the 5 colored wires
Orange
Yellow
Grey 1
Grey 2
Blue
Green
Purple
Thanks in advance!!http://thumbs.subefotos.com/ab279ebe...cfbfa0a06o.jpg
http://thumbs.subefotos.com/cc41d217...0e8b4dfa0o.jpg

Hopefully, Dimitris, from MS Labs get in contact with me and he has solved most of my problems.
This is the units controlled via the colored wires:
• Yellow - Wideband input. Connect this to your wideband analog output

• Grey - Switchable tables. Connect this to a ground (through an on/off switch) to switch between VE/Ignition tables.

• Brown - Launch control. Connect this to a ground (through an on/off switch) to switch launch control on/off.

• Violet (purple) - Boost control low/high. Connect this to a ground through an on/off switch) to switch between low/high boost tables

• Green - Boost control output. Connect this to a boost control valve. The other wire of the boost control valve needs to be connected to a switched and fused 12V source. A 5A fuse is recommended.

• Orange - Free programmable output 1, low side. Can drive any load up to 0.5A.

• Blue - Free programmable output 2, low side. Can drive any load up to 0.5A.


I hope this may help somebody someday.