MS3 mini recommendable and where to purchase?
 

Hey guys,

I would like to replace my Greddy EMU soon.
At the moment my setup contains a 1993 miata with B6 engine and GT2560R. But the B6 should get replaced to a BP engine in the future.

The research for a new ECU ends up with the MS3 mini.

Here are two links:
BOFI Racing - MS Labs MS3 Mini Review - Megasquirt Your Miata / MX5
https://www.miataturbo.net/ms-labs-m...s3-mini-96266/

I think this ECU should work well for my setup.
Do you agree?

Does it matter, where I purchase such a MS3 mini? Or is this product always the same, wherever I purchase this?

Till now, I have only found two shops, that offer this MS3 mini.

One of them is a Tuner here in Germany. He offers that MS3 mini for 1030$.

The other one is this:
MS Labs MS3 Mini (Plug and Play ECU) ? BOFI Racing

If the shipping is free (I hope that is the case), their price would only be 825$.


A further question depending the last link. I need to choose 4 options. Just to be sure
Chassis: I select 89-93, although I am going to swap to BP engine, right? (ECU harness stay the 1993 one)
ECU Plug: to be honest, the installation of my EMU was 10 years in the past, so I really don't know if 2 or 3 plug is the correct selection. :D
Engine: 1.6 or 1.8? I want to install it now at my 1.6 but later use the 1.8. But because the harness stays 1993, 1.6 is the right one?
Origin: Miata (got a canadian one)

Thanks for your advices!
and
Best regards from Germany :)

Match the ECU to your harness/car. :)

Buy from MS Labs

What Six said.

Do they have an online shop or something?

I only found that homepage where you can't do anything:
https://www.mslabs.gr/
and that sheet:
https://www.mslabs.gr/mslc.html

Is that the site where you recommend to order?

Yes. Contact them, he's the guy who builds those.

PM Reverent on here. Or post in his section. He is MSLabs... :)

I believe an NA6 should have a 2-plug ECU.

If you're in Germany, BofiRacing are a UK/EU distributor for him if you wanna go through an intermediary for any reason.


Edit: Just realised you linked the review i wrote for Bofi for the MS3 Mini! Teach me not to read properly!

I have one of his MS3 Minis on my NB and cannot fault it! Any questions or real-world stuff you wanna know, feel free to ask!

Thanks so far, guys.
I pmed Reverent, so lets see what he is answering. :)