- - MS3 na cas sync problem?
(https://www.miataturbo.net/megasquirt-18/ms3-na-cas-sync-problem-53603/)
richyvrlimited
03-11-2011 03:02 PM
Originally Posted by Braineack
(Post 700183)
UK maybe, EU no.
Pretty sure someone already has MS3/MS3x running in the UK too.
ianferrell
03-11-2011 03:14 PM
Originally Posted by Braineack
(Post 700104)
No, since only like 4-5 guys are even on MS3X and all went seq.
but that's how you'd do it, use spark A & B and wire to each pair. Use the LED circuits for something else... why go out of your way to wire up circuits that are already built on the ms3x board?
After the outputs weren't strong enough to fire two COPs at a time, I'd be worried about them firing the factory coils... It was silly of me to even mention it because there probably won't be an issue... I'm just paranoid and at this point I'm tired of trying new things :) Wiring the v3.0 outputs would for sure work.
Braineack
03-11-2011 03:53 PM
new firmware has wasted COP mode. so two drivers fire at same time.
ianferrell
03-11-2011 04:07 PM
Originally Posted by Braineack
(Post 700304)
new firmware has wasted COP mode. so two drivers fire at same time.
But you still have to have individual wires for all the COPs, so you might as well just run sequential in anyway :)
