Miata Turbo Forum - Boost cars, acquire cats.

Miata Turbo Forum - Boost cars, acquire cats. (https://www.miataturbo.net/)

- MEGAsquirt (https://www.miataturbo.net/megasquirt-18/)

- - MS3X VVT Trigger Setup (https://www.miataturbo.net/megasquirt-18/ms3x-vvt-trigger-setup-75743/)

Angryoven

10-27-2013 01:02 AM

MS3X VVT Trigger Setup

Hello All,

Looking to upgrade my head to a later model VVT head.

Was just wanting to make sure I can get it up and running with my current 36-1T trigger wheel setup whilst keeping sequential?

I've read searched around both here and msextra but most people seem to be running the standard 4T trigger wheel setup.

Engine: 94 1.8 Built 9:1 Comp
Ignition: LS2 Coils
Injectors: ID1000CC
Sensors: GM IAT, LC-1 O2, Crank, Cam
ECU: MS3X, Full Sequential IGN/INJ

Any assistance would be much appreciated

Reverant

10-27-2013 04:43 AM

How is your current setup configured for sequential with the 36-1 wheel? Cam trigger wheel?

Angryoven

10-27-2013 03:44 PM

Quote:

Originally Posted by Reverant (Post 1067115)

How is your current setup configured for sequential with the 36-1 wheel? Cam trigger wheel?

Correct, currently have a cam sensor on the exhaust side with one of the teeth cut off.

Reverant

10-27-2013 05:41 PM

This setup won't work with the VVT. You need the FM 36-2 wheel for that combo, along with an intact cam wheel.

Angryoven

10-28-2013 04:26 PM

Quote:

Originally Posted by Reverant (Post 1067202)

This setup won't work with the VVT. You need the FM 36-2 wheel for that combo, along with an intact cam wheel.

Thanks for your help, I'll look into sourcing a FM wheel. :party:

All times are GMT -4. The time now is 11:45 AM.