Clayton1247

installed my MSPNP2 and aem uego 30-4110 wideband, the wide band is wired up to the buzzer alarm the power is wired to the black and yellow wire and the ground is wired to the black wire of the buzzer, I ran the white wire to pin 21 and the blue one to pin 5 but mega squirt is just showing it jumping up and down to the point it’s unreadable I’ve calibrated the sensor and it didn’t help, any help would be appreciated so I can get my car running the car is still NA

curly

iTrader: (25)

disconnect the blue wire.

Clayton1247

Removed the blue wire the issue is still there