MSQ needed
Can someone please provide me with an MSQ for a 1.6 with 550cc injectors?
I've tried the 240cc map and the 460cc but for some reason cannot get it to fire my injectors correctly. Injector bank 1 and 2 match but do not work with the DIYPNP plugged in, but work when stock ECU and AFM are installed. Just wondering if someone can help me out, thank you turbo gods. Email: Phung018@gmail.com |
Change the ReqFuel value on your current MSQ.
|
I believe the req fuel is 6 right now.
|
Does the engine fire up?
|
it's fires up and holds idle at around 500-600, wbo2 reads full lean.
|
Increase fuel (VE)
|
have tried that as well. still sounds like it running on 1-2 cylinders.
i would show composite log but my lap top is currently dead. |
Sequential or batch fuel injection?
|
batch.
|
1 Attachment(s)
Thanks for the MSQ southernmx5
heres a composite log. on cold starts it sounds like it runs on all 4 for about 3 seconds and then it reverts to poo. https://www.miataturbo.net/attachmen...ine=1368159176 |
All times are GMT -4. The time now is 02:42 AM. |
© 2024 MH Sub I, LLC dba Internet Brands