MTX-L connected to TinyIOX gives wrong reading
04-05-2018, 01:10 PM
#1
Senior Member
Thread Starter
Join Date: Nov 2007
Location: Belgium
Posts: 999
Total Cats: 73
MTX-L connected to TinyIOX gives wrong reading
I've connected my MTX-L through the TinyIOX and although all seems to be set OK, I'm getting wrong values for my AFR.
When I'm connecting the MTX-L to the analog O2 port as usual, the values are correct.
Is this a setting that I have wrong somewhere? My TinyIOX reported AFR is 14.3 (green on the laptop) while the gauge is showing the real AFR of 16.4
The gauge does correspond to the laptop, ie it goes up and down together with the reading on the laptop.
Can't seem to embed a google picture so here's a link: https://tinyurl.com/yazaole2
When I'm connecting the MTX-L to the analog O2 port as usual, the values are correct.
Is this a setting that I have wrong somewhere? My TinyIOX reported AFR is 14.3 (green on the laptop) while the gauge is showing the real AFR of 16.4
The gauge does correspond to the laptop, ie it goes up and down together with the reading on the laptop.
Can't seem to embed a google picture so here's a link: https://tinyurl.com/yazaole2
Last edited by WestfieldMX5; 04-05-2018 at 01:26 PM.
Reply
0
0
04-05-2018, 05:11 PM
#2
SADFab Destructive Testing Engineer
iTrader: (5)
Join Date: Apr 2014
Location: Beaverton, USA
Posts: 18,642
Total Cats: 1,866
Are your afr data settings correct? See this big post I made on setting up the tiny.
http://www.miataturbo.net/megasquirt...tinyiox-89144/
http://www.miataturbo.net/megasquirt...tinyiox-89144/
Reply
0
0
Thread
Thread Starter
Forum
Replies
Last Post
