I just built my MS-II, it going to run parallel so I followed ARGA's 2n2222a transistor CAM/CRANK inputs and now I'm looking for turbo MAPs. Could someone post what they have MS-I or MS-II. I can use the 96-97 PNP map I guess but a real NB map would be better.

Also, where did you run the hose for the MAP source on you NB?

 

No decent maps here. I hooked the vacuum hose to the intake manifold. Well, specifically there's a spot on the back I believe that's capped off (not used). Just take that off and slide on the hose.

 

My hose runs through a grommet in the firewall to the left of the brake master.

One of my MSQ's is in this folder. http://tokrv.net/cjernigan/10G.zip

 

Found the grommet, it's between the break and clutch master. I had to notch the clutch pedal assy to pass the hose through, pretty easy though

 

Weird, mine isn't between the two cylinders. Mine is to the passenger side of the brake master. Much easier to access.

 

Yea mines run through there too...where the cruise control line originally went through.