NBFL 1.9 Crank/No start
2 Attachment(s)
Hi all, it's my first. I looked everywhere to solve a crank no start problem but i can't.
I think that my problem is some settings on my ecu which is an MS3 Basic PnP from Bofiracing. Ecu FW 1.4.0 and loaded with basemap where i just changed injector size and dead-time. I will share the log, the composite log (which today has a tooth skip) of a crank no start and the timing belt job that i done. The cams at cyl1 TDC are: intake left 90° and exhaust right 90° looking from the front. For the tooth skip is because i messed with the toothed wheel without doing the gap but yesterday was working well and still crank no start. I can't read the log very well so if anyone can help me i will be so happy to understand and maybe i can find if there's some setting to change in the ecu. Thank you all. Timing belt job photos: https://i.postimg.cc/SsT5YRW1/timing1.jpg https://i.postimg.cc/qqW5QFD8/timing2.jpg https://i.postimg.cc/5yXrBJg4/timing3.jpg |
All times are GMT -4. The time now is 02:45 AM. |
© 2024 MH Sub I, LLC dba Internet Brands