NBFL 1.9 Crank/No start
#1
NBFL 1.9 Crank/No start
Hi all, it's my first. I looked everywhere to solve a crank no start problem but i can't.
I think that my problem is some settings on my ecu which is an MS3 Basic PnP from Bofiracing. Ecu FW 1.4.0 and loaded with basemap where i just changed injector size and dead-time.
I will share the log, the composite log (which today has a tooth skip) of a crank no start and the timing belt job that i done.
The cams at cyl1 TDC are: intake left 90° and exhaust right 90° looking from the front.
For the tooth skip is because i messed with the toothed wheel without doing the gap but yesterday was working well and still crank no start.
I can't read the log very well so if anyone can help me i will be so happy to understand and maybe i can find if there's some setting to change in the ecu.
Thank you all.
Timing belt job photos:
https://i.postimg.cc/SsT5YRW1/timing1.jpg
https://i.postimg.cc/qqW5QFD8/timing2.jpg
https://i.postimg.cc/5yXrBJg4/timing3.jpg
I think that my problem is some settings on my ecu which is an MS3 Basic PnP from Bofiracing. Ecu FW 1.4.0 and loaded with basemap where i just changed injector size and dead-time.
I will share the log, the composite log (which today has a tooth skip) of a crank no start and the timing belt job that i done.
The cams at cyl1 TDC are: intake left 90° and exhaust right 90° looking from the front.
For the tooth skip is because i messed with the toothed wheel without doing the gap but yesterday was working well and still crank no start.
I can't read the log very well so if anyone can help me i will be so happy to understand and maybe i can find if there's some setting to change in the ecu.
Thank you all.
Timing belt job photos:
https://i.postimg.cc/SsT5YRW1/timing1.jpg
https://i.postimg.cc/qqW5QFD8/timing2.jpg
https://i.postimg.cc/5yXrBJg4/timing3.jpg
Thread
Thread Starter
Forum
Replies
Last Post
Shinjitago
Engine Performance
5
12-20-2015 12:23 PM
Chiburbian
Engine Performance
2
04-27-2014 06:30 PM