Need feedback on MS2 build plan. A MS2 for a 91/94
Hi All,
I want some feedback on my MS2 build plan. It is for a 91 with a 94 engine. Here are a list of mods I am planning to do: 1) Use Abe's adapter board. It will have the better Schmitt's trigger based input. Will have switched power for my WBO2. Will have the idle compensation for A/C Better PWM idle drivers 2) Build Joe's better spark output with a PNP or a second NPN transistor. 3) Build fan control relay circuit. 4) Electronic boost control. ( This might be a later mod ) 5) Mod the intake to fit the IAT sensor. 6) Bigger 305cc supra injectors (might run it at higher fule pressure) 7) I have a question about WBO2 setup. Should I get a Innovate LC-1 or a JAW/NAW setup? Anybody with JAW/NAW experience give some feedback? Thanks in advance. -Raj |
I have the JAW working with my MS-II
The good: Works great, less expensive The bad: Was a pain to calibrate, support is forum-based and tends to disappear for long periods, certain firmwares are rumored to have fried WBO2s. |
I've got a JAW currently. It's pretty decent given the price and I really don't have any complaints about it. I wish it were easier to interface with the MS which is why I'm about to replace it with an LC1. But it's possible as mj71 said.
|
Thanks guys.
Mj71, that was my opinion too. Rccote, what do you mean by wish it was easier to interface with MS? Do you want to sell the JAW? -Raj |
I wish it were easier to get them to work together is what I meant, and yeah I'm probably going to sell it soon.
|
All times are GMT -4. The time now is 06:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands