On its way

I can see some points where overrun fuel cut is being disabled due to the A/C working (the idle valve opens more, so the fuel load increases and above 40% disables the overrun fuel cut). You can safely increase it to 45 and see if that helps.

I need to check your A/C settings a little more.

I *think* the AC was off during the first example (the 15 second stretch) and was on during the second example.

Yes it was off during the first example and engine braking was normal - the injectors were off and the idle valve was at 25% - nowhere near enough to cause any engine braking issues.

Where is the overrun fuel cut setting so that I can up it to 45 as you suggested?

Extended -> Overrun fuel cut -> "and KPa lower than"

-deleted-

That's what I get for not getting to the thread for 5 hours after opening the page.

Am I missing somewhere where setting the "and kpa lower than 45" sounds like a good idea?

Attachment 185899
lol @ admin-troll

im not trolling, i have my overrun set at something like, well hold on let me look, greater than 1500RPM and less than 28kPa. I idle at 31-32kPa.

I cant look at msq and logs at work.

You don't have an Enhanced MS2. With a regular MS2 or MS3 you wouldn't even be able to drive the car or have it idle with those values.

https://www.miataturbo.net/attachmen...ine=1340347159
You have to pay the troll toll if you want to get into this boy's hole.

Could be a placebo effect, but I think upping it to 40 helped...

you so crazy! there's a reason I tell people to contact you directly if they have an enhanced unit with any questions :)